This white paper demonstrates the performance advantages of using SanDisk flash storage for Oracle database 12c transactional workloads compared to hard disk drives.
Oracle Database 12c brings an interesting set of new features to the table, such as pluggable databases for cloud environments and In-Memory option for accelerating analytical and transactional workloads. These enhancements can help DBAs meet performance objectives, but only if the data is supplied to the Oracle database at the speed at which the Oracle engine requires. Solid state disks can meet these data access requirements, thus accelerating applications for cloud, transaction, and data warehouse workloads. This white paper provides complete insight into the transactional workload performance advantages of using SanDisk flash storage for Oracle Database 12c. It also highlights different approaches and corresponding benefits for implementing Oracle Database on flash storage.
Historically, short-stroking a spinning hard disk drive was a commonly used technique for increasing storage performance and accelerating database applications. However, today the practice of short stroking drives is passé. It adds a considerable amount of work for storage admins, with a significant reduction in storage capacity, and results in only minimal performance improvements. The emergence of flash storage has provided database administrators (DBAs) new ways to leverage databases storage such as Oracle. Using flash storage shifts the DBA’s efforts from troubleshooting database storage issues to optimizing stored procedures and packages for additional database improvements.
The testing reported in this white paper has the following objectives:
The solution discussed in this white paper demonstrates the deployment of a single-instance Oracle 12c database on a Lenovo x3650 server. The database storage is initially configured using JBODs with short-stroked, high-performance hard disk drives and is later switched to SanDisk Optimus solid state drives.
The SanDisk flash implementation for Oracle database 12c was tested with the following configuration:
The solution uses the following deployment configuration:
Figure 1: Test environment layout
|Server and Client|
|Storage||SSD Configuration:||4 SanDisk Optimus SSDs, 800GB each, RAID 10|
|HDD Configuration:||24 SAS 15K RPM HDDs, 300GB each (short-stroked to 50%, or 150GB), RAID 10|
|Operating System||Oracle Linux 6.5|
|Database||Oracle Database 12c (126.96.36.199)|
Figure 2: Test Execution
SanDisk Optimus SAS SSD
SanDisk is a leader in flash storage solutions. SanDisk’s portfolio of solid-state drives (SSDs) supports the megatrends in the industry that are driving new application deployments, including cloud, big data/analytics, mobility, and social media. Because many of these new applications store their data in Oracle databases, Oracle NoSQL and these applications must deliver optimized performance to support timely business results.
SanDisk Optimus SAS SSDs address a wide range of enterprise storage and server applications. Optimus SAS SSDs support high performance for applications and databases while providing consistent quality of service (QoS). Their wide range of storage capacities, from 200GB to 4TB (Optimus MAX™ SSD), enables more flexibility for IT deployments. It is worth noting that the Mean Time Between Failures (MTBF) for the SanDisk Optimus SAS SSDs is very high—2.5 Million Hours MTBF—with a warranty period of five years. Optimus SAS SSDs are protected by SanDisk’s Guardian™ Technology platform, which provides FlashGuard™, DataGuard™, and EverGuard™ capabilities that increase the durability, recoverability, and prevention of data loss and corruption.
For additional details, refer to the Guardian Technology data sheet on http://www.sandisk.com.
Oracle Database 12c, released in June, 2013, has introduced many new features, including expanded support for cloud-based workloads, support for storage tiering in data warehouse environments using segment level heat maps, and other enhancements for performance, security, and data protection. (Details can be found on the Oracle website at www.oracle.com.) These new features provide a broad range of new capabilities for the worldwide database marketplace leveraging Oracle database products.
For example, Oracle Multitenant introduces a new architecture that supports a multitenant container database that holds many pluggable databases. This enables better support for cloud workloads in Oracle Database 12c, so customers can consolidate multiple databases into a single-container database for easier management and IT efficiency. This approach reduces server sprawl (particularly for virtual servers, or VMs, that support databases), a chief concern of first-generation adopters of virtualization in database environments. The enhancements to Oracle Database 12c build on the benefits of modern solid state disk technology, enabling customers to achieve a better consolidation ratio than possible with legacy hard disk storage.
This paper is focused mainly on SanDisk Optimus solid storage device vs. short-stroked, spinning disk performance in Oracle Database 12c transaction workloads. The rest of this paper provides more details about the specific testing that was done to demonstrate the advantages of using SSDs in Oracle database deployments.
The solution test used HammerDB to execute a transactional workload on an Oracle 12c single-instance database. The Lenovo server setup configuration and database setup were kept consistent for both HDD and SSDs tests. HammerDB was configured with 100 users and tests were executed for 60 minutes duration. The transaction output metrics of Transactions per Minute (TPM) and New Orders per Minute were captured from the workload response perspective. To evaluate database performance, an Automatic Workload Repository (AWR) report was generated for every test execution to identify the top wait events. The system performance metrics were also captured, to identify any system bottlenecks. These three performance metrics of workload response, database performance, and system throughput were utilized to see the overall performance advantages provided by SanDisk Optimus SSD’s over a large quantity of high performance short-stroked spinning hard disk drives.
The performance metrics from the hard disks served as the baseline for comparison. During the Oracle transaction workload test, average user CPU utilization was measured at about 15 percent, and CPU I/O wait time averaged around 50 percent. Using Oracle AWR reports helped to identify I/O issues from the Oracle database perspective.
AWR reports showed 14.4 million DB File Sequential Read wait events, or single-block data requests that needed to be fetched from disk drives to process the transactions. The short-stroked drives served DB File Sequential Read Requests at 13.61 ms latency, contributing 55.1percent of the database time for the test. The next most frequent wait event was Log File Sync. It used 34.9 percent of the database time, although the actual work done by Oracle during test duration was only 5 percent of the database time. This is a clear indication that Oracle waited for data to be supplied from storage (the HDDs). Figure 3 shows the top 10 wait events from the AWR report.
Figure 3: HDD test Oracle AWR performance baseline
The section below provides different flash implementation approaches to address these wait events and increase transaction throughput.
Flash Implementation Approach 1
Oracle Smart Flash Cache
To take advantage of flash storage benefits for database performance, Oracle introduced the Database Smart Flash Cache feature starting with Oracle 11g Release 2. This feature transparently extends the Oracle database buffer cache from main memory to a second level cache on flash memory. (Details of this feature and its implementation are discussed in the SanDisk white paper “Oracle Smart Flash Cache using SanDisk Flash”.) With this featured enabled, tests showed a 136 percent improvement in transactions (see Figure 4 below) from the baseline performance. This performance improvement is due to single-block data requests being serviced from flash storage: metric DB flash cache single block physical read indicates the Flash Cache serviced 19.9 million I/O requests with 0.28 millisecond latency, as shown in Figure 4. Oracle served 6 million additional single-block requests from the hard disk storage with an average wait time of 13.06 ms. Comparing the performance of the two storage mediums, the flash storage latency (0.28 ms) was 48x better than the hard disk latency (13.61 ms). Latency reduction for single-block requests with Flash Cache improved CPU utilization to 6.7 percent during the test, compared to 4.9 percent with the baseline testing.
Figure 4: Oracle AWR performance Top 10 wait events – Approach 1 testing
Figure 5: Oracle 12c Flash Cache performance and DB file sequential read latency comparison
Flash Implementation Approach 2
Oracle Redo Log Files on Flash Storage As noted earlier the Oracle Database Smart Flash Cache (Flash implementation approach 1) mitigated the top wait event of single-block reads to a great extent and increased transactional throughput. The second top priority wait event from AWR reporting is the Logfile Sync Event. This wait event becomes a major bottleneck in OLTP environments, resulting in significant reduction in transaction throughput. Logfile sync events are triggered when a user session commits the transaction, and the contents of the log buffer must be written to the redo log file to confirm that the transaction is committed and fully secured. Figure 6 gives a high-level view of the Oracle database commit operation.
Figure 6: Oracle commit operation and redo log file sync event
The majority of this wait event depends on write I/O operations from the LGWR to redo log files. The speed of the I/O subsystem is major factor in getting commit acknowledgement back to the user process. For high- transactional workload scenarios, placing redo log files on flash storage helps provide the required log file acceleration. In flash implementation approach 2, log files were migrated from hard disk storage to the ASM REDO disk group that was provisioned using SanDisk Optimus SSDs. The sector size of the log file was changed from a default of 512 bytes to 4KB. It was confirmed during testing that increasing the sector size from 512 bytes to 4KB provided additional improvement in transaction throughput: the HammerDB transaction workload test results showed a 63 percent improvement. Latency for the logfile sync wait event was reduced from the baseline of 17.51 milliseconds to 0.27 milliseconds, and DB CPU utilization increased from the baseline of 4.9 percent to 7.2 percent.
Figure 7: Oracle AWR performance Top 10 wait events – Approach 2 testing
Figure 8 shows the transactions throughput and redo log file access latency comparison of HDD baseline to redo log files on flash storage.
Figure 8: Redo log files on flash performance and Redo log file sync latency comparison
Flash Implementation Approach 3
Partial Transactional Schema on Flash Storage
Flash implementation approaches 1 and 2 yielded higher transactional throughput by minimizing I/O wait events such as single-block read and log file sync. A third approach is to identify candidate database objects that could take advantage of flash storage to increase overall transactional throughput of the database. Such frequently accessed tables and indexes can be identified in the AWR report. Once the hot objects were identified, they were moved to flash storage, with the rest of the database objects retained on spinning disk.
To implement approach 3, two new tablespaces named SSDDATA and SSDINDX were created on the flash storage ASM diskgroup. Hot tables were moved to SSDDATA, and frequently-used indexes were rebuilt on the SSDINDX tablespace. With these changes, the HammerDB workload test execution resulted in a massive 302 percent improvement in transaction count. DB CPU utilization increased up to 11.6 percent and system CPU utilization up to 40 percent, based on iostat reporting. The increased DB CPU and system CPU utilization indicates that the Oracle database engine was driving more work and waiting less for data to be supplied from storage.
Figure 9: Oracle AWR performance Top 10 wait events – Approach 3 testing
Figure 10: Storage performance comparison - partial schema on flash
Flash Implementation Approach 4
Full Transactional schema on Flash Storage Flash implementation approaches 1 through 3 increased transactional throughput and greatly reduced Oracle I/O wait events. The AWR reports and system metrics, however, suggest that CPU utilization was not fully optimized to drive peak transactional throughput from the server, and that some CPU cycles were spent waiting for I/O. The slow I/O occurred because some data was still being read from or written to the legacy hard disks drives, even after moving frequently accessed data to flash storage.
Approach 4 involves placing the entire transactional schema on flash storage to drive more transactions and fully take advantage of system resources. This configuration setup involves placing the redo log and data files on the ASM disk groups created on Optimus SSD drives. The Oracle Database Smart Flash Cache was disabled for this test. The HammerDB benchmark workload was executed, and test results showed a significant 538 percent (5.3X) increase in transaction count. The average transactions per any given minute during the full 60-minute test run showed an amazing 6-digit transactions count. AWR reported that DB CPU utilization increased from 4 percent on the HDD baseline to 35.7 percent. This approach serves as an excellent configuration choice for customer-facing applications needing high-transaction throughput, with minimal system and database latency.
Figure 11: Oracle AWR performance Top 10 wait events – Approach 4 testing
Figure 12 shows the transaction comparison chart for various test configurations. Having the full transactional schema on SSD delivered the highest transaction throughput.
Figure 12: Performance comparison - flash storage implementation
To demonstrate the CPU utilization benefits with this approach, Figure 13 provides a comparison of the HDD baseline test versus the all SSD tests. The HDD baseline tests show user CPU utilization at just under 15 percent of the system’s 20 cores (40 hyper-threads) and I/O wait at around 50 percent. By contrast, when the full schema was on SanDisk SSDs, the user CPU utilization averaged 75 percent and I/O waits dropped below 11 percent. These CPU utilization metrics highlight the significant benefit of using SSD storage for Oracle database: it enables Oracle to deliver higher transaction throughput by supplying the data at higher speeds, minimizing the I/O waits. HDD storage kept Oracle Database in wait mode, while SSD storage allowed the Oracle engine to switch from wait mode to work mode.
Figure 13: CPU utilization comparison chart – all HDD vs. all SSD
Figure 14 below shows the activity distribution for the test period. The figure was produced from Oracle Enterprise Manager and represents a 4 ½ minute window while the HammerDB benchmark was executing.
Figure 14: Oracle Enterprise Manager Performance report during ALL SSD test
The above figures show the system CPUs were carrying out database transactions, data requests were fulfilled with user I/O operations, and transactions were completed with commit operations. No other bottlenecks in system I/O, database configuration issues, or network issues were seen in the graph. The results of this report coincide with those of the AWR performance report shown in Figure 12.
The table below summarizes the cost and performance benefits of using the SanDisk Optimus SSD solution for Oracle OLTP workloads. Only the storage costs are considered for highlighting the SanDisk SSD benefits: server infrastructure and Oracle Database configuration setup remained constant during the test as database storage was switched from legacy hard disk drives to modern SanDisk SSDs. The table below shows that the SanDisk SSDs delivered 5X the performance benefit for Oracle OLTP workloads, at 63 percent lower cost than short-stroked, high-performance spinning disk drives. Because it is important to address both reliability and high performance and follow Oracle best practices for OLTP workload, RAID 10 configuration was used. It is possible to use just three SanDisk SSDs with a RAID 5 configuration to further reduce storage costs while maintaining performance.
|Drives||SanDisk Optimus SSD||HDD|
|Total Number of Disks/Drives||4||24|
|RAID for OLTP Workload||RAID 10||RAID 10|
|Drive Cost||$1567 x 4 = $ 6268||$419 X 24 = $ 10056|
|Cost Benefit Percentage||63%||0%|
|OLTP Performance Benefit||1X transaction count||5X transaction count|
|SQL IOPS during OLTP Test||32000 IOPS||5500 IOPS|
Figure 15: Storage cost benefit analysis
This white paper demonstrated the various SanDisk flash implementation approaches and related performance benefits for Oracle Database 12c, single-instance, on a Lenovo X3650 server. In our performance benchmarking tests, we demonstrated how four SanDisk Optimus SSDs outperformed 24 short-stroked, high-performance 15K RPM hard disk drives. Using part of a single Optimus SSD with Oracle Flash Cache, delivered a 136 percent performance benefit increase and up to 538 percent benefit at 63 percent lower cost in the case of full transactional schema on the all SanDisk SSD configuration. These test results will help customers evaluate the advantages of a SanDisk flash implementation, starting with Oracle Database 12c Flash Cache and extending to placing the entire application schema on SanDisk flash storage.
This white paper highlights how significant storage bottlenecks can be avoided for Oracle transaction workloads, helping the database administrator focus on other important tasks. The SanDisk Optimus SSDs are protected by the Guardian Technology platform, which reduces the flash wear and protects data as required by Oracle transactional systems. With significant advantages in performance, cost, and reliability (with the Guardian Technology platform), customers can safely transition from traditional short-stroked, spinning disks to SanDisk flash storage such as Optimus SSDs.
Sia che desideriate porre alcune domande iniziali o siate pronti a discutere una soluzione SanDisk su misura per le esigenze della vostra azienda, gli addetti alle vendite SanDisk sono pronti ad assistervi.
Ci impegniamo a rispondervi tempestivamente, compilate il seguente modulo.
Grazie. Abbiamo ricevuto la vostra richiesta.